Engineering Management Project Assignment

Engineering Management Project Assignment
You (and a partner if you chose) will evaluate the success/failure of the Woody 2000 case study.
You will develop a debriefing report that should be handed in as an executive memo/executive
briefing, addressed to your manager. It must include (at a minimum):
– Summary problem being solved, goal, and a brief synopsis of key facts.
– Responses to all of the questions posed in the case (from pages 11-14 of the case study
document). You must also provide supporting facts, concepts, tools, and reasoning to support
your responses to each question. Your response itself is not sufficient. You need to include any
charts, calculations, figures you may develop as per the requirement(s) of the question.
– What tools/concepts did the project team used properly and why you think so?
What tools and concepts were used in the case? Do you think these tools/concepts were
appropriate and why you think so?
Brief reflection on the tool(s) and/or concept(s) used in the case.
Supporting arguments and analysis that lead to your rationale.
– Outline what you may have done differently if you were the project manager in charge of the
project and what tools/concepts would you have applied and why.
What additional tools/concepts would you include in this project and why?
Supporting arguments and analysis that lead to your rationale.
– Recommendations and the rationale for your recommendations.
Was the project goal achieved? Why/Why not?
What are your ideas for next steps?
Supporting arguments and analysis that lead to your rationale.
Remember: Your opinion does NOT count; your responses, recommendations, and actions, and
the support that your analysis provides to support them.

Performance of Building Envelope Systems in Hot Climates.

Performance of Building Envelope Systems in Hot Climates.
The term paper will only focus on the ( wall ) building envelope system and not the whole
system. Specifically in hot climates.
Introduction:
Introduces building envelope systems
And wall envelope system in hot climates.
Hot climates.
Theoretical part :
Need international examples of buildings where they used wall building envelope systems that
are specifically for hot climates with detailed drawings to support.
Focus on one case study which is the : Sydney Opera House
Give background and history of the building.
Also about the building envelope system used in the walls of the opera house, in the hot climate
of Australia.with detailed drawings and pictures to support.
Citation is important for pictures too.

Texas City / BP Refinery Explosion Assignment

Texas City / BP Refinery Explosion
The project will be a paper on an actual accident involving a chemical(s), chemical plant, or
explosion in a manufacturing plant. There is not a page limit on the paper, but it must be at least
10 pages, double-spaced, with references, and must be plagiarism free. Therefore, please
ensure all quotes and sources are noted. APA formatting is to be used.
Also from https://assignmentstutors.com/
#Pay for essay #Do my homework #Buy essays #Essay writing help #Academic writing service #Pay for essay writing #Custom essays #Academic writing service #Business writing service #Custom papers #How to write a case study #How to write argumentative essay #How to write a dissertation #How to write an essay #How to write a research paper

Engineering Solutions for a Better World: Making Clean Water Available for Everyone

Engineering Solutions for a Better World: Making Clean Water Available for Everyone
Required
A report on how to use engineering solutions to solve some of the  greatest challenges in some communities. The world needs affordable, adequate, and accessible energy, water, transport means, food, house,  healthcare,, and so forth. You are required to use your engineering knowledge and skills to solve one of these problems. Your report should be about 12-15 pages, and formatted in Harvard style. Cite any sources used. You are free to include charts/tables/graphs etc. However, they should not distract the flow of content. You can include them in the appendix, and a few in the body of the report.
At https://assignmentstutors.com/how-it-works/
#Pay for essay #Do my homework #Buy essays #Essay writing help #Academic writing service #Pay for essay writing #Custom essays #Academic writing service #Business writing service #Custom papers #How to write a case study #How to write argumentative essay #How to write a dissertation #How to write an essay #How to write a research paper

Engineering Solutions for a Better World: Making Clean Water Available for Everyone

Engineering Solutions for a Better World: Making Clean Water Available for Everyone
Required
A report on how to use engineering solutions to solve some of the  greatest challenges in some communities. The world needs affordable, adequate, and accessible energy, water, transport means, food, house,  healthcare,, and so forth. You are required to use your engineering knowledge and skills to solve one of these problems. Your report should be about 12-15 pages, and formatted in Harvard style. Cite any sources used. You are free to include charts/tables/graphs etc. However, they should not distract the flow of content. You can include them in the appendix, and a few in the body of the report.
At https://assignmentstutors.com/how-it-works/
#Pay for essay #Do my homework #Buy essays #Essay writing help #Academic writing service #Pay for essay writing #Custom essays #Academic writing service #Business writing service #Custom papers #How to write a case study #How to write argumentative essay #How to write a dissertation #How to write an essay #How to write a research paper

Stereolithography Based 3D Printing

Stereolithography Based 3D Printing
I will attach the requirements of how to write the introduction and conclusion. please follow them
also, I attached the grading rubric for introduction
1-page single space (introduction) then the conclusion

Stereolithography Based 3D Printing

Stereolithography Based 3D Printing
I will attach the requirements of how to write the introduction and conclusion. please follow them
also, I attached the grading rubric for introduction
1-page single space (introduction) then the conclusion

Network Design for Office Building Instructions

Network Design for Office Building Instructions 
Congratulations! After graduating from UMUC with your degree, you’ve been hired by a local company that is in the process of moving into new space. Your job is design out the local area network for this new space. The office building has 3 floors with cubicle and office space for 24 workstations on each floor. Additionally, on the second floor, there is a separate space designated for four file servers, which will be used company-wide. Finally, there are two telecommunications closets on each end of each floor for housing network equipment. Please review the accompanying office diagram for specifics before you begin designing the network.
Your design assumption is that the network should support the following on each desktop workstation:
a) Office applications such as Microsoft Office Suite (housed on one of the local servers)
b) Electronic Mail (housed on one of the local servers)
c) Network file sharing (housed on one of the local servers)
d) Internet Access
e) Database access to one of the local servers
f) Occasional data streaming (live video conferencing, etc.)
Your specific assignment is to complete the following:
1. Specify what type of cabling would run to each workstation;
2. Specify the network device(s) housed on each floor;
3. Specify the connections between the network devices and servers (what type of network are you proposing); and
4. Explain your rationale for each of the decision above. In other words, why did you select the device/cabling/connections.
5. Develop a physical network diagram that shows cabling choices, network devices and connections to devices and servers.
The Deliverable
The CTO has asked you to develop a network design that provides the following:
· A Microsoft word document that spells out your network design, the recommended network cabling, device(s), and connections between workstations, device(s), and servers (in other words, summarize in writing your recommendations to the above), and develop
· A physical network diagram that displays the components specified above.
Your network diagram can be produced using any drawing software package available if you save it in a format that is viewable to your instructor, such as a pdf (check with your instructor to ensure she/he can open your particular network diagram). In addition, you may choose to draw your physical diagram by hand, which is okay. Please make the diagram neat and legible, use color to identify specific components and cable paths, label all components, and upload a high-resolution photo of your design to the assignment tab. You may break your diagram into sections (photograph and upload those separately) if you include an illustration of how these sections fit together.
If you utilize external references, your sources must be cited correctly in APA format.  Your paper will be graded according to the Scoring Rubric below. Be sure you have incorporated all required aspects of the assignment.

Network Design for Office Building Instructions

Network Design for Office Building Instructions 
Congratulations! After graduating from UMUC with your degree, you’ve been hired by a local company that is in the process of moving into new space. Your job is design out the local area network for this new space. The office building has 3 floors with cubicle and office space for 24 workstations on each floor. Additionally, on the second floor, there is a separate space designated for four file servers, which will be used company-wide. Finally, there are two telecommunications closets on each end of each floor for housing network equipment. Please review the accompanying office diagram for specifics before you begin designing the network.
Your design assumption is that the network should support the following on each desktop workstation:
a) Office applications such as Microsoft Office Suite (housed on one of the local servers)
b) Electronic Mail (housed on one of the local servers)
c) Network file sharing (housed on one of the local servers)
d) Internet Access
e) Database access to one of the local servers
f) Occasional data streaming (live video conferencing, etc.)
Your specific assignment is to complete the following:
1. Specify what type of cabling would run to each workstation;
2. Specify the network device(s) housed on each floor;
3. Specify the connections between the network devices and servers (what type of network are you proposing); and
4. Explain your rationale for each of the decision above. In other words, why did you select the device/cabling/connections.
5. Develop a physical network diagram that shows cabling choices, network devices and connections to devices and servers.
The Deliverable
The CTO has asked you to develop a network design that provides the following:
· A Microsoft word document that spells out your network design, the recommended network cabling, device(s), and connections between workstations, device(s), and servers (in other words, summarize in writing your recommendations to the above), and develop
· A physical network diagram that displays the components specified above.
Your network diagram can be produced using any drawing software package available if you save it in a format that is viewable to your instructor, such as a pdf (check with your instructor to ensure she/he can open your particular network diagram). In addition, you may choose to draw your physical diagram by hand, which is okay. Please make the diagram neat and legible, use color to identify specific components and cable paths, label all components, and upload a high-resolution photo of your design to the assignment tab. You may break your diagram into sections (photograph and upload those separately) if you include an illustration of how these sections fit together.
If you utilize external references, your sources must be cited correctly in APA format.  Your paper will be graded according to the Scoring Rubric below. Be sure you have incorporated all required aspects of the assignment.

Byzantine Art

Please answer the questions by the given links.
Byzantine Art takes it’s name from the ancient city of Byzantium (formerly Constantinople, and today, Istanbul, Turkey). The Empire was the Eastern part of the old Roman Empire but Byzantine art is markedly different from Roman art.  After the Crusades, and sack of Constantinople by the Turks in 1453, the traditions of Byzantine Art ended up in Russia primarily.
https://smarthistory.org/a-beginners-guide-to-byzantine-art/ (Links to an external site.)
Link Mosaics (Links to an external site.)
The Beginner’s Guide will give you an overview for each period of Byzantine Art (Early, Middle, Late) using the guide, summarize what you believe are the 3 most important artistic, cultural, OR historic events for EACH period.  Then, watching the short video on mosaics – answer the following – what are mosaics, were were/are they placed, and what types of materials were used to make mosaics 
Link Engineering an Empire – Byzantium (Links to an external site.)
By far, the most famous church to be built in the Early Empire period for the Emperor Justinian was Hagia Sophia (Church of Holy Wisdom in Greek).  The link above is from a much longer program – watch between 30:00- 35:42 (about 5 minutes) and summarize why it was built, who designed it (what were their backgrounds), and what did they do to construct such a massive dome – describe it USING THE VIDEO. How does the church reaffirm Justinian’s power?
In addition to mosaics, icons are another huge component of Byzantine art and religious tradition.  Icons are traditionally wood panels painted with the image of Christ, Mary, or other religious figures.  The word itself, from the Greek means image. The first link below is from an article describing the iconoclastic controversy during the Byzantine Empire – what was it? Why did it come about?  what was the counter argument for keeping the icons?  Then, watch the video (Questioning Religious Authority) – at what other times in history did iconoclasm, or image breaking, take place? Why?  The end of the video talks about the Baymian Buddhas – what is the irony surrounding their destruction? 
Link Iconoclastic Controversies (Links to an external site.)
Link – Questioning Religious AuthorityLinks to an external site.