Hazardous Materials Safety

/in /by

Hazardous Materials Safety

For this assignment, imagine that you were recently hired as the safety officer at a chemical
manufacturing facility with over 1,000 different chemicals on site. The facility does not have a
functioning hazard communication (HazCom) program. You determine that you need to start from
scratch on the program. Provide a detailed approach for the steps you would take to develop an
effective HazCom program for the facility. Your paper must at least address the issues listed
below.
What steps would you take to ensure you are in compliance with the Occupational Safety and
Health Administration (OSHA) HazCom regulation?
Which best practice steps would you include that go beyond compliance with the OSHA
regulation to make the program more effective?
Which employees at the facility would you use to complete the process?
How would you conduct training after the initial steps have been completed?
How would you make the safety data sheets (SDSs) available to employees?
What procedures would you use to evaluate the effectiveness of the program?
Your essay must be at least three pages in length, not counting the title page and references
page. You must include at least two credible references and use APA Style for in-text citations
and references.

Remote access policy

/in /by

Remote access policy

Design a remote access control policy for Richman using the appropriate access controls for
systems, applications, and data access. Include the design and justification for using the
selected access controls for systems, applications, and data access.
The following are a few concepts that you should brush up on as you attempt this assignment:
Methods that can be used to connect remotely, such as a dial-up connection or a virtual private
network (VPN)
Requirements for user systems before they are allowed to connect
Terms of use associated with remotely connecting to the network
Policy enforcement.

Review on the radiation effects in high entropy alloys after ion irradiation

/in /by

Review on the radiation effects in high entropy alloys after ion irradiation

The aim is to find the peculiarities of the defects of formation and radiation effects arising in high
entropy alloys during the ion irradiation with different energies and doses
this invistigation will be done by the writer by finding journal articles of irradiated high entropy
alloys with helium ions or hydrogen ions and investigate the effects and the reports
this can be done by taking each journal article and citing the findings of each article by saying
something along the lines of: “this paper took the HEA AbCDeFG-0.5Al and found that after
irradiating it with this amount of radiation for this long under these conditions it suffered from
affects 1, 2 and 3″

I will suggest focusing on 3 papers and analyzing them separately, and then make a discussion
part analyzing them all or discussing the results.
Also, If time allows, add a small section before the conclusion discussing papers that used
Neutron irradiation and its effects
if no papers found on the effect of neutron irradiation on HEA then maybe discuss the differences
or similarities on the effects of ion and neutron irradiation on conventional alloys.
this work should inculde:
1- cover page
2- table of content
3- abstract
4- introduction: a very brief explanation about HEA and their importance in replacing
conventional nuclear power plants material like conventional fuel rods. then move to discuss
briefly on the superiority in general of HEA over conventional alloys in all aspects then move to
focus on the effects of irradiation resistance and the effects of radiation on HEA.
then move to discuss the papers
5- paper 1 (title of section is: ” Analysis of “(title of paper)”)
6- paper 2 (title of section is: ” Analysis of “(title of paper)”)
7- paper 3 (title of section is: ” Analysis of “(title of paper)”)
8- general discussion of irradiation on HEA (repeat what is said before, maybe add a section of
comparison with conventional alloys)
9- (if time allows) add a section on neutron radiation effect on HEA or on conventional alloys and
extrapolate the effects on HEA
10- future aspects and future research prospect and future opportunities of research in this field
(150-300 words)
11-conclusion
12- references ( the do not have to reach 14, aim at 10 to 14)
I attached a book that might help, please use it as reference
citation style is IEEE

Renewable Energy in Saudi Arabia

/in /by

Renewable Energy in Saudi Arabia

Mainly is to provide statistics with graphs for the below 2 requirements:
1- The development of PV in the world. (Capacity, production, installations, shares, target Compare with non-renewable energy, etc.)

2- The development of PV in Saudi Arabia and the future/goal of PV in Saudi Arabia. (Capacity, production, installations, shares, growth, target, growth, needs, etc.)

-It has to be very professional since this work is related to a thesis. (No Plagiarism is allowed).
– Note all graphs should be in a spread sheet (not in between the words neither the lines).

Kindly use the sources I have provided (Ren21 & IRENA). You may use other sources when required.

Kindly share a drajvzft when the first part is completed.

Thanks.

Reliability (RAM) analysis of power plant

/in /by

Reliability (RAM) analysis of power plant

Need help with calculations of maintenance frequencies (sheet 2) and reliability parameters for three sets of suppliers: Alpha, Beta and Gamma. General task description in pdf, but writing is not need, only calculations in excel with equations used.

Systems Thinking Assignment

/in /by

Systems Thinking Assignment

Systems Thinking and Continuous Improvement–Organizational Analysis
Apply systems thinking to analyze Lumen Technologies work processes, problems, or initiatives
and make recommendations for improvement. Identify a work process, problem, or initiative. The
process, problem, or initiative chosen should be simple, having only five to ten variables, and
have definable boundaries which are small in scope. Three page APA paper analyzing the work
process, problem, or initiative using systems thinking to make recommendations for
improvement. Then with the information create a Causal Loop Diagram in support analysis.
Attached one reference to help.

Usage of quantum dots in medical imaging and sensing

/in /by

Usage of quantum dots in medical imaging and sensing

ACS format w/ at least 20 references, in-text citation, times new Roman 11 Font, no plagiarism
abstract:
6-9 sentences
Introduction:
history, current innovations, important advancements
Discussion:
different approaches to the application of quantum dots in medical imaging and sensing
Conclusion:
summerize with a take home message
refrence page:
acs format

Unmanned Drones in Criminal Investigations

/in /by

Unmanned Drones in Criminal Investigations

Determining the advantages/disadvantages to using drones (water, air, and land) in criminal
investigations.
Hypotheses are already given and pros/cons and uses for the three types of drones (aka robots)
already done.
I ONLY need a few additional bits that state how the factors that are already given will make the
determining factor on whether to accept or deny the hypothesis.
Example:
To analyze Hypothesis 1: Drone capabilities can significantly enhance the chances of a
successful criminal investigation, six of the eight factors will be taken into consideration:
operating time, distance, payload capacity, speed, GPS compatibility, and battery life.
The basis on which the hypothesis will be accepted or rejected is whether ……
Full paper not necessary, just fill in information on what I already have. Would be willing to send
other chapters if writer needs to get an idea of the paper (only submitted current CH).

Expt 3_Kinetics Lab Experiment

/in /by

Expt 3_Kinetics Lab Experiment

Use the given data on pages 185 and 186 to write the lab report for this experiment.

TITLE:

YOUR NAME:

ABSTRACT:

What you did (Explain the Procedure that you followed)
How you did it (Give the tool and/or “simulator URL” used)
Why you did it (What was the purpose for doing this experiment)
What you found (Discuss the quality of your data based on the size of percent error values if you have any and/or Discuss something that you figured out about how the values in your data change as you manipulate the simulator)

DATA/ANALYSIS: Attached the completed report sheets (pages 185-186) that was included in the “Expt 3_Kinetic Lab Experiment” handout.

CONCLUSION: What did you learn, not what you did using the simulator. Explain a concept, skill, tool, or formula that you learned as a result of doing this experiment.

Project Engineer Job Position Application

/in /by

Project Engineer Job Position Application

ASSIGNMENT DETAILS:
The ministry regulates activities that impact the environment through a number of statutes
including the following:
I. The Environmental Assessment Act and its associated regulations,
II. The Environmental Protection Act and its associated regulations,
III. The Ontario Water Resources Act and its associated regulations,
IV. The Safe Drinking Water Act and its associated regulations.
Please describe how the ministry administers the above statutes for actual physical works
or systems in one of the categories below:
a. Sewage Collection
b. Stormwater Management
c. Equipment for the Management of Air Contaminants

d. Waste Management Systems
that is located within five (5) km of your place of residence (I live in 6444 Torre Drive,
Mississauga, Ontario, Canada). For Waste Management Systems, you may select a
system within the boundaries of your municipality. If you live outside Ontario or in a rural
area, please use 40 St. Clair Avenue West, Toronto, Ontario as the default location.
Choose one topic from the above (either a, b, c or d) to:
1. Describe the works or system, and the purpose from the environmental and health
protection perspective.
2. Identity the physical location of the works or system through street
addresses or geo-referencing, and the distance from your residence.
3. Identify which of the statutes listen in items I-IV above apply to the works in question,
and what approvals or permissions the ministry issues for the establishment or alteration
of each. Include the specific legislative reference, and if available, identify the specific
approval or permission including reference number and date of issue.
4. Identify the engineering principles/design criteria that are used by ministry engineers
prior to making a decision to approve or deny the approval for the establishment or
alteration of the works or system. What are the environmental protection principles that
these codify?
5. Provide references for all sources of information used in 1-4, and describe how you
organized the completion of this task.

Evaluation Criteria (MUST include all points in the written assignment). The above
responses MUST include the following:
1. Knowledge of engineering principles and environmental regulations,
2. Written communications skills,
3. Project management and organizational skills,
4. Demonstration of problem-solving skills,
5. Proficiency in the application of computer software.